久久久精品午夜_国产一二三四ts人妖_久久久久成人精品免费播放_日本女人一级片_亚洲射逼_日韩有码第一页

ATG12CN-S日本東日轉矩量儀

ATG/BTG Torque Gauge
Direction
 
   
  For measurement of micro torquecalibration of torque tools.  
     
 
ATG/BTG Torque Gauge  
Complimentary Products
TGTCL TGTCL Calibration Kit for ATG/ BTG
 
  Select proper model according to unit of measure as following color code :  
 
S.I. =     Metric =     American =  
Accuracy ±2%
 
 
Model Torque Range Overall Lgth. Outside Diameter Chuck Grip Weight Approx
S.I. Metric American Min.-Max. Graduation
S.I. Metric American S.I. Metric American mm in. mm in. mm in. kg oz.
ATG045CN 45ATG ATG06Z cN.m 0.05-0.45 gf.cm 5-45 in.oz 0.06-0.60 cN.m 0.01 gf.cm 1 in.oz 0.01 90

3- 7/8

43.5 1 23/32 ø1 ~ ø6.5 3/64 ~ 1/4 0.18 6 3/8
ATG09CN-S 90ATG-S ATG1.5Z-S 0.1-0.9 10-90 0.2-1.5 0.02 2 0.02
ATG1.5CN-S 150ATG-S ATG2.4Z-S 0.2-1.5 20-150 0.3-2.4 0.05
ATG3CN-S 300ATG-S ATG4.5Z-S 0.3-3 30-300 0.5-4.5 0.05 5 0.1
ATG6CN-S 600ATG-S ATG9Z-S 0.6-6 60-600 1-9 0.1 10 0.2
ATG12CN-S 1200ATG-S ATG18Z-S 1-12 100-1200 2-18 0.2 20 0.5
ATG24CN-S 2400ATG-S ATG36Z-S 3-24 300-2400 4-36 0.5 50
- - BTG60Z-S - - 6-60 - - 1 118 5 9/32 64.2 2 17/32 ø1 ~ ø8.5 3/64 ~ 11/32 0.52 18 3/8
BTG120Z-S 10-120 2
BTG15CN-S 1.5BTG-S 1.5BTG-A-S 2-15 kgf.cm 0.2-1.5 in.lbs 0.1-1.5 0.2 kgf.cm 0.02 in.lbs 0.02
BTG24CN-S 2.4BTG-S 2.4BTG-A-S 3-24 0.3-2.4 0.3-2.4 0.5 0.05
BTG36CN-S 3.6BTG-S 3.6BTG-A-S 4-36 0.4-3.6 0.4-3.6 0.05
BTG60CN-S 6BTG-S 6BTG-A-S 6-60 0.6-6 0.6-6 1 0.1 0.1
BTG90CN-S 9BTG-S 9BTG-A-S 10-90 1-9 1-9
BTG150CN-S 15BTG-S 15BTG-A-S 20-150 2-15 2-15 2 0.2 0.2
 
  Notes  
 
  1. Memory pointer on sideon top of dial face (not shown in picture)are standard
  2. ATG-S overall length with top pointer is 4-1/16"
  3. ATG045CN, 45ATGATG06Z are provided without side or top memory pointer due to very low torque value.
  4. ATG now provided with aluminum chuck as standard. All plastic or all steel chuck can be ordered separately. (Plastic chuck is shown in the photo above)

ATG6CN-S日本東日轉矩量儀

ATG/BTG Torque Gauge
Direction
 
   
  For measurement of micro torquecalibration of torque tools.  
     
 
ATG/BTG Torque Gauge  
Complimentary Products
TGTCL TGTCL Calibration Kit for ATG/ BTG
 
  Select proper model according to unit of measure as following color code :  
 
S.I. =     Metric =     American =  
Accuracy ±2%
 
 
Model Torque Range Overall Lgth. Outside Diameter Chuck Grip Weight Approx
S.I. Metric American Min.-Max. Graduation
S.I. Metric American S.I. Metric American mm in. mm in. mm in. kg oz.
ATG045CN 45ATG ATG06Z cN.m 0.05-0.45 gf.cm 5-45 in.oz 0.06-0.60 cN.m 0.01 gf.cm 1 in.oz 0.01 90

3- 7/8

43.5 1 23/32 ø1 ~ ø6.5 3/64 ~ 1/4 0.18 6 3/8
ATG09CN-S 90ATG-S ATG1.5Z-S 0.1-0.9 10-90 0.2-1.5 0.02 2 0.02
ATG1.5CN-S 150ATG-S ATG2.4Z-S 0.2-1.5 20-150 0.3-2.4 0.05
ATG3CN-S 300ATG-S ATG4.5Z-S 0.3-3 30-300 0.5-4.5 0.05 5 0.1
ATG6CN-S 600ATG-S ATG9Z-S 0.6-6 60-600 1-9 0.1 10 0.2
ATG12CN-S 1200ATG-S ATG18Z-S 1-12 100-1200 2-18 0.2 20 0.5
ATG24CN-S 2400ATG-S ATG36Z-S 3-24 300-2400 4-36 0.5 50
- - BTG60Z-S - - 6-60 - - 1 118 5 9/32 64.2 2 17/32 ø1 ~ ø8.5 3/64 ~ 11/32 0.52 18 3/8
BTG120Z-S 10-120 2
BTG15CN-S 1.5BTG-S 1.5BTG-A-S 2-15 kgf.cm 0.2-1.5 in.lbs 0.1-1.5 0.2 kgf.cm 0.02 in.lbs 0.02
BTG24CN-S 2.4BTG-S 2.4BTG-A-S 3-24 0.3-2.4 0.3-2.4 0.5 0.05
BTG36CN-S 3.6BTG-S 3.6BTG-A-S 4-36 0.4-3.6 0.4-3.6 0.05
BTG60CN-S 6BTG-S 6BTG-A-S 6-60 0.6-6 0.6-6 1 0.1 0.1
BTG90CN-S 9BTG-S 9BTG-A-S 10-90 1-9 1-9
BTG150CN-S 15BTG-S 15BTG-A-S 20-150 2-15 2-15 2 0.2 0.2
 
  Notes  
 
  1. Memory pointer on sideon top of dial face (not shown in picture)are standard
  2. ATG-S overall length with top pointer is 4-1/16"
  3. ATG045CN, 45ATGATG06Z are provided without side or top memory pointer due to very low torque value.
  4. ATG now provided with aluminum chuck as standard. All plastic or all steel chuck can be ordered separately. (Plastic chuck is shown in the photo above)

ATG3CN-S日本東日轉矩量儀

ATG/BTG Torque Gauge
Direction
 
   
  For measurement of micro torquecalibration of torque tools.  
     
 
ATG/BTG Torque Gauge  
Complimentary Products
TGTCL TGTCL Calibration Kit for ATG/ BTG
 
  Select proper model according to unit of measure as following color code :  
 
S.I. =     Metric =     American =  
Accuracy ±2%
 
 
Model Torque Range Overall Lgth. Outside Diameter Chuck Grip Weight Approx
S.I. Metric American Min.-Max. Graduation
S.I. Metric American S.I. Metric American mm in. mm in. mm in. kg oz.
ATG045CN 45ATG ATG06Z cN.m 0.05-0.45 gf.cm 5-45 in.oz 0.06-0.60 cN.m 0.01 gf.cm 1 in.oz 0.01 90

3- 7/8

43.5 1 23/32 ø1 ~ ø6.5 3/64 ~ 1/4 0.18 6 3/8
ATG09CN-S 90ATG-S ATG1.5Z-S 0.1-0.9 10-90 0.2-1.5 0.02 2 0.02
ATG1.5CN-S 150ATG-S ATG2.4Z-S 0.2-1.5 20-150 0.3-2.4 0.05
ATG3CN-S 300ATG-S ATG4.5Z-S 0.3-3 30-300 0.5-4.5 0.05 5 0.1
ATG6CN-S 600ATG-S ATG9Z-S 0.6-6 60-600 1-9 0.1 10 0.2
ATG12CN-S 1200ATG-S ATG18Z-S 1-12 100-1200 2-18 0.2 20 0.5
ATG24CN-S 2400ATG-S ATG36Z-S 3-24 300-2400 4-36 0.5 50
- - BTG60Z-S - - 6-60 - - 1 118 5 9/32 64.2 2 17/32 ø1 ~ ø8.5 3/64 ~ 11/32 0.52 18 3/8
BTG120Z-S 10-120 2
BTG15CN-S 1.5BTG-S 1.5BTG-A-S 2-15 kgf.cm 0.2-1.5 in.lbs 0.1-1.5 0.2 kgf.cm 0.02 in.lbs 0.02
BTG24CN-S 2.4BTG-S 2.4BTG-A-S 3-24 0.3-2.4 0.3-2.4 0.5 0.05
BTG36CN-S 3.6BTG-S 3.6BTG-A-S 4-36 0.4-3.6 0.4-3.6 0.05
BTG60CN-S 6BTG-S 6BTG-A-S 6-60 0.6-6 0.6-6 1 0.1 0.1
BTG90CN-S 9BTG-S 9BTG-A-S 10-90 1-9 1-9
BTG150CN-S 15BTG-S 15BTG-A-S 20-150 2-15 2-15 2 0.2 0.2
 
  Notes  
 
  1. Memory pointer on sideon top of dial face (not shown in picture)are standard
  2. ATG-S overall length with top pointer is 4-1/16"
  3. ATG045CN, 45ATGATG06Z are provided without side or top memory pointer due to very low torque value.
  4. ATG now provided with aluminum chuck as standard. All plastic or all steel chuck can be ordered separately. (Plastic chuck is shown in the photo above)

ATG1.5CN-S日本東日轉矩量儀

ATG/BTG Torque Gauge
Direction
 
   
  For measurement of micro torquecalibration of torque tools.  
     
 
ATG/BTG Torque Gauge  
Complimentary Products
TGTCL TGTCL Calibration Kit for ATG/ BTG
 
  Select proper model according to unit of measure as following color code :  
 
S.I. =     Metric =     American =  
Accuracy ±2%
 
 
Model Torque Range Overall Lgth. Outside Diameter Chuck Grip Weight Approx
S.I. Metric American Min.-Max. Graduation
S.I. Metric American S.I. Metric American mm in. mm in. mm in. kg oz.
ATG045CN 45ATG ATG06Z cN.m 0.05-0.45 gf.cm 5-45 in.oz 0.06-0.60 cN.m 0.01 gf.cm 1 in.oz 0.01 90

3- 7/8

43.5 1 23/32 ø1 ~ ø6.5 3/64 ~ 1/4 0.18 6 3/8
ATG09CN-S 90ATG-S ATG1.5Z-S 0.1-0.9 10-90 0.2-1.5 0.02 2 0.02
ATG1.5CN-S 150ATG-S ATG2.4Z-S 0.2-1.5 20-150 0.3-2.4 0.05
ATG3CN-S 300ATG-S ATG4.5Z-S 0.3-3 30-300 0.5-4.5 0.05 5 0.1
ATG6CN-S 600ATG-S ATG9Z-S 0.6-6 60-600 1-9 0.1 10 0.2
ATG12CN-S 1200ATG-S ATG18Z-S 1-12 100-1200 2-18 0.2 20 0.5
ATG24CN-S 2400ATG-S ATG36Z-S 3-24 300-2400 4-36 0.5 50
- - BTG60Z-S - - 6-60 - - 1 118 5 9/32 64.2 2 17/32 ø1 ~ ø8.5 3/64 ~ 11/32 0.52 18 3/8
BTG120Z-S 10-120 2
BTG15CN-S 1.5BTG-S 1.5BTG-A-S 2-15 kgf.cm 0.2-1.5 in.lbs 0.1-1.5 0.2 kgf.cm 0.02 in.lbs 0.02
BTG24CN-S 2.4BTG-S 2.4BTG-A-S 3-24 0.3-2.4 0.3-2.4 0.5 0.05
BTG36CN-S 3.6BTG-S 3.6BTG-A-S 4-36 0.4-3.6 0.4-3.6 0.05
BTG60CN-S 6BTG-S 6BTG-A-S 6-60 0.6-6 0.6-6 1 0.1 0.1
BTG90CN-S 9BTG-S 9BTG-A-S 10-90 1-9 1-9
BTG150CN-S 15BTG-S 15BTG-A-S 20-150 2-15 2-15 2 0.2 0.2
 
  Notes  
 
  1. Memory pointer on sideon top of dial face (not shown in picture)are standard
  2. ATG-S overall length with top pointer is 4-1/16"
  3. ATG045CN, 45ATGATG06Z are provided without side or top memory pointer due to very low torque value.
  4. ATG now provided with aluminum chuck as standard. All plastic or all steel chuck can be ordered separately. (Plastic chuck is shown in the photo above)

ATG09CN-S日本東日轉矩量儀

ATG/BTG Torque Gauge
Direction
 
   
  For measurement of micro torquecalibration of torque tools.  
     
 
ATG/BTG Torque Gauge  
Complimentary Products
TGTCL TGTCL Calibration Kit for ATG/ BTG
 
  Select proper model according to unit of measure as following color code :  
 
S.I. =     Metric =     American =  
Accuracy ±2%
 
 
Model Torque Range Overall Lgth. Outside Diameter Chuck Grip Weight Approx
S.I. Metric American Min.-Max. Graduation
S.I. Metric American S.I. Metric American mm in. mm in. mm in. kg oz.
ATG045CN 45ATG ATG06Z cN.m 0.05-0.45 gf.cm 5-45 in.oz 0.06-0.60 cN.m 0.01 gf.cm 1 in.oz 0.01 90

3- 7/8

43.5 1 23/32 ø1 ~ ø6.5 3/64 ~ 1/4 0.18 6 3/8
ATG09CN-S 90ATG-S ATG1.5Z-S 0.1-0.9 10-90 0.2-1.5 0.02 2 0.02
ATG1.5CN-S 150ATG-S ATG2.4Z-S 0.2-1.5 20-150 0.3-2.4 0.05
ATG3CN-S 300ATG-S ATG4.5Z-S 0.3-3 30-300 0.5-4.5 0.05 5 0.1
ATG6CN-S 600ATG-S ATG9Z-S 0.6-6 60-600 1-9 0.1 10 0.2
ATG12CN-S 1200ATG-S ATG18Z-S 1-12 100-1200 2-18 0.2 20 0.5
ATG24CN-S 2400ATG-S ATG36Z-S 3-24 300-2400 4-36 0.5 50
- - BTG60Z-S - - 6-60 - - 1 118 5 9/32 64.2 2 17/32 ø1 ~ ø8.5 3/64 ~ 11/32 0.52 18 3/8
BTG120Z-S 10-120 2
BTG15CN-S 1.5BTG-S 1.5BTG-A-S 2-15 kgf.cm 0.2-1.5 in.lbs 0.1-1.5 0.2 kgf.cm 0.02 in.lbs 0.02
BTG24CN-S 2.4BTG-S 2.4BTG-A-S 3-24 0.3-2.4 0.3-2.4 0.5 0.05
BTG36CN-S 3.6BTG-S 3.6BTG-A-S 4-36 0.4-3.6 0.4-3.6 0.05
BTG60CN-S 6BTG-S 6BTG-A-S 6-60 0.6-6 0.6-6 1 0.1 0.1
BTG90CN-S 9BTG-S 9BTG-A-S 10-90 1-9 1-9
BTG150CN-S 15BTG-S 15BTG-A-S 20-150 2-15 2-15 2 0.2 0.2
 
  Notes  
 
  1. Memory pointer on sideon top of dial face (not shown in picture)are standard
  2. ATG-S overall length with top pointer is 4-1/16"
  3. ATG045CN, 45ATGATG06Z are provided without side or top memory pointer due to very low torque value.
  4. ATG now provided with aluminum chuck as standard. All plastic or all steel chuck can be ordered separately. (Plastic chuck is shown in the photo above)

ATG045CN日本東日轉矩量儀

ATG/BTG Torque Gauge
Direction
 
   
  For measurement of micro torquecalibration of torque tools.  
     
 
ATG/BTG Torque Gauge  
Complimentary Products
TGTCL TGTCL Calibration Kit for ATG/ BTG
 
  Select proper model according to unit of measure as following color code :  
 
S.I. =     Metric =     American =  
Accuracy ±2%
 
 
Model Torque Range Overall Lgth. Outside Diameter Chuck Grip Weight Approx
S.I. Metric American Min.-Max. Graduation
S.I. Metric American S.I. Metric American mm in. mm in. mm in. kg oz.
ATG045CN 45ATG ATG06Z cN.m 0.05-0.45 gf.cm 5-45 in.oz 0.06-0.60 cN.m 0.01 gf.cm 1 in.oz 0.01 90

3- 7/8

43.5 1 23/32 ø1 ~ ø6.5 3/64 ~ 1/4 0.18 6 3/8
ATG09CN-S 90ATG-S ATG1.5Z-S 0.1-0.9 10-90 0.2-1.5 0.02 2 0.02
ATG1.5CN-S 150ATG-S ATG2.4Z-S 0.2-1.5 20-150 0.3-2.4 0.05
ATG3CN-S 300ATG-S ATG4.5Z-S 0.3-3 30-300 0.5-4.5 0.05 5 0.1
ATG6CN-S 600ATG-S ATG9Z-S 0.6-6 60-600 1-9 0.1 10 0.2
ATG12CN-S 1200ATG-S ATG18Z-S 1-12 100-1200 2-18 0.2 20 0.5
ATG24CN-S 2400ATG-S ATG36Z-S 3-24 300-2400 4-36 0.5 50
- - BTG60Z-S - - 6-60 - - 1 118 5 9/32 64.2 2 17/32 ø1 ~ ø8.5 3/64 ~ 11/32 0.52 18 3/8
BTG120Z-S 10-120 2
BTG15CN-S 1.5BTG-S 1.5BTG-A-S 2-15 kgf.cm 0.2-1.5 in.lbs 0.1-1.5 0.2 kgf.cm 0.02 in.lbs 0.02
BTG24CN-S 2.4BTG-S 2.4BTG-A-S 3-24 0.3-2.4 0.3-2.4 0.5 0.05
BTG36CN-S 3.6BTG-S 3.6BTG-A-S 4-36 0.4-3.6 0.4-3.6 0.05
BTG60CN-S 6BTG-S 6BTG-A-S 6-60 0.6-6 0.6-6 1 0.1 0.1
BTG90CN-S 9BTG-S 9BTG-A-S 10-90 1-9 1-9
BTG150CN-S 15BTG-S 15BTG-A-S 20-150 2-15 2-15 2 0.2 0.2
 
  Notes  
 
  1. Memory pointer on sideon top of dial face (not shown in picture)are standard
  2. ATG-S overall length with top pointer is 4-1/16"
  3. ATG045CN, 45ATGATG06Z are provided without side or top memory pointer due to very low torque value.
  4. ATG now provided with aluminum chuck as standard. All plastic or all steel chuck can be ordered separately. (Plastic chuck is shown in the photo above)

BTG60CN-S日本東日轉矩量儀

ATG/BTG Torque Gauge
Direction
 
   
  For measurement of micro torquecalibration of torque tools.  
     
 
ATG/BTG Torque Gauge  
Complimentary Products
TGTCL TGTCL Calibration Kit for ATG/ BTG
 
  Select proper model according to unit of measure as following color code :  
 
S.I. =     Metric =     American =  
Accuracy ±2%
 
 
Model Torque Range Overall Lgth. Outside Diameter Chuck Grip Weight Approx
S.I. Metric American Min.-Max. Graduation
S.I. Metric American S.I. Metric American mm in. mm in. mm in. kg oz.
ATG045CN 45ATG ATG06Z cN.m 0.05-0.45 gf.cm 5-45 in.oz 0.06-0.60 cN.m 0.01 gf.cm 1 in.oz 0.01 90

3- 7/8

43.5 1 23/32 ø1 ~ ø6.5 3/64 ~ 1/4 0.18 6 3/8
ATG09CN-S 90ATG-S ATG1.5Z-S 0.1-0.9 10-90 0.2-1.5 0.02 2 0.02
ATG1.5CN-S 150ATG-S ATG2.4Z-S 0.2-1.5 20-150 0.3-2.4 0.05
ATG3CN-S 300ATG-S ATG4.5Z-S 0.3-3 30-300 0.5-4.5 0.05 5 0.1
ATG6CN-S 600ATG-S ATG9Z-S 0.6-6 60-600 1-9 0.1 10 0.2
ATG12CN-S 1200ATG-S ATG18Z-S 1-12 100-1200 2-18 0.2 20 0.5
ATG24CN-S 2400ATG-S ATG36Z-S 3-24 300-2400 4-36 0.5 50
- - BTG60Z-S - - 6-60 - - 1 118 5 9/32 64.2 2 17/32 ø1 ~ ø8.5 3/64 ~ 11/32 0.52 18 3/8
BTG120Z-S 10-120 2
BTG15CN-S 1.5BTG-S 1.5BTG-A-S 2-15 kgf.cm 0.2-1.5 in.lbs 0.1-1.5 0.2 kgf.cm 0.02 in.lbs 0.02
BTG24CN-S 2.4BTG-S 2.4BTG-A-S 3-24 0.3-2.4 0.3-2.4 0.5 0.05
BTG36CN-S 3.6BTG-S 3.6BTG-A-S 4-36 0.4-3.6 0.4-3.6 0.05
BTG60CN-S 6BTG-S 6BTG-A-S 6-60 0.6-6 0.6-6 1 0.1 0.1
BTG90CN-S 9BTG-S 9BTG-A-S 10-90 1-9 1-9
BTG150CN-S 15BTG-S 15BTG-A-S 20-150 2-15 2-15 2 0.2 0.2
 
  Notes  
 
  1. Memory pointer on sideon top of dial face (not shown in picture)are standard
  2. ATG-S overall length with top pointer is 4-1/16"
  3. ATG045CN, 45ATGATG06Z are provided without side or top memory pointer due to very low torque value.
  4. ATG now provided with aluminum chuck as standard. All plastic or all steel chuck can be ordered separately. (Plastic chuck is shown in the photo above)

BTG36N-S日本東日轉矩量儀

ATG/BTG Torque Gauge
Direction
 
   
  For measurement of micro torquecalibration of torque tools.  
     
 
ATG/BTG Torque Gauge  
Complimentary Products
TGTCL TGTCL Calibration Kit for ATG/ BTG
 
  Select proper model according to unit of measure as following color code :  
 
S.I. =     Metric =     American =  
Accuracy ±2%
 
 
Model Torque Range Overall Lgth. Outside Diameter Chuck Grip Weight Approx
S.I. Metric American Min.-Max. Graduation
S.I. Metric American S.I. Metric American mm in. mm in. mm in. kg oz.
ATG045CN 45ATG ATG06Z cN.m 0.05-0.45 gf.cm 5-45 in.oz 0.06-0.60 cN.m 0.01 gf.cm 1 in.oz 0.01 90

3- 7/8

43.5 1 23/32 ø1 ~ ø6.5 3/64 ~ 1/4 0.18 6 3/8
ATG09CN-S 90ATG-S ATG1.5Z-S 0.1-0.9 10-90 0.2-1.5 0.02 2 0.02
ATG1.5CN-S 150ATG-S ATG2.4Z-S 0.2-1.5 20-150 0.3-2.4 0.05
ATG3CN-S 300ATG-S ATG4.5Z-S 0.3-3 30-300 0.5-4.5 0.05 5 0.1
ATG6CN-S 600ATG-S ATG9Z-S 0.6-6 60-600 1-9 0.1 10 0.2
ATG12CN-S 1200ATG-S ATG18Z-S 1-12 100-1200 2-18 0.2 20 0.5
ATG24CN-S 2400ATG-S ATG36Z-S 3-24 300-2400 4-36 0.5 50
- - BTG60Z-S - - 6-60 - - 1 118 5 9/32 64.2 2 17/32 ø1 ~ ø8.5 3/64 ~ 11/32 0.52 18 3/8
BTG120Z-S 10-120 2
BTG15CN-S 1.5BTG-S 1.5BTG-A-S 2-15 kgf.cm 0.2-1.5 in.lbs 0.1-1.5 0.2 kgf.cm 0.02 in.lbs 0.02
BTG24CN-S 2.4BTG-S 2.4BTG-A-S 3-24 0.3-2.4 0.3-2.4 0.5 0.05
BTG36CN-S 3.6BTG-S 3.6BTG-A-S 4-36 0.4-3.6 0.4-3.6 0.05
BTG60CN-S 6BTG-S 6BTG-A-S 6-60 0.6-6 0.6-6 1 0.1 0.1
BTG90CN-S 9BTG-S 9BTG-A-S 10-90 1-9 1-9
BTG150CN-S 15BTG-S 15BTG-A-S 20-150 2-15 2-15 2 0.2 0.2
 
  Notes  
 
  1. Memory pointer on sideon top of dial face (not shown in picture)are standard
  2. ATG-S overall length with top pointer is 4-1/16"
  3. ATG045CN, 45ATGATG06Z are provided without side or top memory pointer due to very low torque value.
  4. ATG now provided with aluminum chuck as standard. All plastic or all steel chuck can be ordered separately. (Plastic chuck is shown in the photo above)

BTG15CN-S日本東日轉矩量儀

ATG/BTG Torque Gauge
Direction
 
   
  For measurement of micro torquecalibration of torque tools.  
     
 
ATG/BTG Torque Gauge  
Complimentary Products
TGTCL TGTCL Calibration Kit for ATG/ BTG
 
  Select proper model according to unit of measure as following color code :  
 
S.I. =     Metric =     American =  
Accuracy ±2%
 
 
Model Torque Range Overall Lgth. Outside Diameter Chuck Grip Weight Approx
S.I. Metric American Min.-Max. Graduation
S.I. Metric American S.I. Metric American mm in. mm in. mm in. kg oz.
ATG045CN 45ATG ATG06Z cN.m 0.05-0.45 gf.cm 5-45 in.oz 0.06-0.60 cN.m 0.01 gf.cm 1 in.oz 0.01 90

3- 7/8

43.5 1 23/32 ø1 ~ ø6.5 3/64 ~ 1/4 0.18 6 3/8
ATG09CN-S 90ATG-S ATG1.5Z-S 0.1-0.9 10-90 0.2-1.5 0.02 2 0.02
ATG1.5CN-S 150ATG-S ATG2.4Z-S 0.2-1.5 20-150 0.3-2.4 0.05
ATG3CN-S 300ATG-S ATG4.5Z-S 0.3-3 30-300 0.5-4.5 0.05 5 0.1
ATG6CN-S 600ATG-S ATG9Z-S 0.6-6 60-600 1-9 0.1 10 0.2
ATG12CN-S 1200ATG-S ATG18Z-S 1-12 100-1200 2-18 0.2 20 0.5
ATG24CN-S 2400ATG-S ATG36Z-S 3-24 300-2400 4-36 0.5 50
- - BTG60Z-S - - 6-60 - - 1 118 5 9/32 64.2 2 17/32 ø1 ~ ø8.5 3/64 ~ 11/32 0.52 18 3/8
BTG120Z-S 10-120 2
BTG15CN-S 1.5BTG-S 1.5BTG-A-S 2-15 kgf.cm 0.2-1.5 in.lbs 0.1-1.5 0.2 kgf.cm 0.02 in.lbs 0.02
BTG24CN-S 2.4BTG-S 2.4BTG-A-S 3-24 0.3-2.4 0.3-2.4 0.5 0.05
BTG36CN-S 3.6BTG-S 3.6BTG-A-S 4-36 0.4-3.6 0.4-3.6 0.05
BTG60CN-S 6BTG-S 6BTG-A-S 6-60 0.6-6 0.6-6 1 0.1 0.1
BTG90CN-S 9BTG-S 9BTG-A-S 10-90 1-9 1-9
BTG150CN-S 15BTG-S 15BTG-A-S 20-150 2-15 2-15 2 0.2 0.2
 
  Notes  
 
  1. Memory pointer on sideon top of dial face (not shown in picture)are standard
  2. ATG-S overall length with top pointer is 4-1/16"
  3. ATG045CN, 45ATGATG06Z are provided without side or top memory pointer due to very low torque value.
  4. ATG now provided with aluminum chuck as standard. All plastic or all steel chuck can be ordered separately. (Plastic chuck is shown in the photo above)

BTG150CN-S日本東日轉矩量儀

ATG/BTG Torque Gauge
Direction
 
   
  For measurement of micro torquecalibration of torque tools.  
     
 
ATG/BTG Torque Gauge  
Complimentary Products
TGTCL TGTCL Calibration Kit for ATG/ BTG
 
  Select proper model according to unit of measure as following color code :  
 
S.I. =     Metric =     American =  
Accuracy ±2%
 
 
Model Torque Range Overall Lgth. Outside Diameter Chuck Grip Weight Approx
S.I. Metric American Min.-Max. Graduation
S.I. Metric American S.I. Metric American mm in. mm in. mm in. kg oz.
ATG045CN 45ATG ATG06Z cN.m 0.05-0.45 gf.cm 5-45 in.oz 0.06-0.60 cN.m 0.01 gf.cm 1 in.oz 0.01 90

3- 7/8

43.5 1 23/32 ø1 ~ ø6.5 3/64 ~ 1/4 0.18 6 3/8
ATG09CN-S 90ATG-S ATG1.5Z-S 0.1-0.9 10-90 0.2-1.5 0.02 2 0.02
ATG1.5CN-S 150ATG-S ATG2.4Z-S 0.2-1.5 20-150 0.3-2.4 0.05
ATG3CN-S 300ATG-S ATG4.5Z-S 0.3-3 30-300 0.5-4.5 0.05 5 0.1
ATG6CN-S 600ATG-S ATG9Z-S 0.6-6 60-600 1-9 0.1 10 0.2
ATG12CN-S 1200ATG-S ATG18Z-S 1-12 100-1200 2-18 0.2 20 0.5
ATG24CN-S 2400ATG-S ATG36Z-S 3-24 300-2400 4-36 0.5 50
- - BTG60Z-S - - 6-60 - - 1 118 5 9/32 64.2 2 17/32 ø1 ~ ø8.5 3/64 ~ 11/32 0.52 18 3/8
BTG120Z-S 10-120 2
BTG15CN-S 1.5BTG-S 1.5BTG-A-S 2-15 kgf.cm 0.2-1.5 in.lbs 0.1-1.5 0.2 kgf.cm 0.02 in.lbs 0.02
BTG24CN-S 2.4BTG-S 2.4BTG-A-S 3-24 0.3-2.4 0.3-2.4 0.5 0.05
BTG36CN-S 3.6BTG-S 3.6BTG-A-S 4-36 0.4-3.6 0.4-3.6 0.05
BTG60CN-S 6BTG-S 6BTG-A-S 6-60 0.6-6 0.6-6 1 0.1 0.1
BTG90CN-S 9BTG-S 9BTG-A-S 10-90 1-9 1-9
BTG150CN-S 15BTG-S 15BTG-A-S 20-150 2-15 2-15 2 0.2 0.2
 
  Notes  
 
  1. Memory pointer on sideon top of dial face (not shown in picture)are standard
  2. ATG-S overall length with top pointer is 4-1/16"
  3. ATG045CN, 45ATGATG06Z are provided without side or top memory pointer due to very low torque value.
  4. ATG now provided with aluminum chuck as standard. All plastic or all steel chuck can be ordered separately. (Plastic chuck is shown in the photo above)

最新產品

熱門儀器: 液相色譜儀 氣相色譜儀 原子熒光光譜儀 可見分光光度計 液質聯用儀 壓力試驗機 酸度計(PH計) 離心機 高速離心機 冷凍離心機 生物顯微鏡 金相顯微鏡 標準物質 生物試劑
主站蜘蛛池模板: 黑人巨大精品欧美一区二区免费 | 欧美一区二不卡视频 | 亚洲精品看片 | 日本欧美一区二区视频 | 久久五月激情 | 亚洲AV无码一区二区三区18 | 丝袜美女视频性感美女 | 欧美在线观看网址 | 亚洲亚洲精品三区日韩精品在线视频 | 五月婷久久综合狠狠爱97 | 4虎av| 伊人久久大香线蕉综合网 | 亚洲成AⅤ人片久青草影院 四虎影院在线播放 | 日本无码一区二区三区在线 | 亚洲精品av一区在线观看 | 免费看一级视频 | 99久久精品免费精品国产 | 在线观看亚洲精品国产福利片 | 国产精品成人一区二区三区 | 亚洲熟妇久久国产精品 | 亚洲图片欧美小说 | 91成人天堂久久成人 | 欧美三级不卡在线播放 | 粉嫩av一区二区在线播 | 一区二区欧美在线观看 | 丰满少妇熟女高潮流白浆 | 香蕉久久一区二区三区 | 毛片黄视频 | 男生夜间福利免费网站 | 亚洲成人一区二区三区 | 最新中文字幕第一页视频 | 亚洲国产伊人 | 学生在线精品一区二区 | 免费视频wwwyyy在线观看 | 动漫AV纯肉无码AV在线播放 | 国产精选h网站 | 鸳鸯谱在线观看高清 | 夜夜爱天天干 | 久久久久久久久久久久久久久国产 | 欧美性生交18XXXXX无码 | 99视频在线免费 |