產品展示
進口液化石油氣泵(歐美進口品牌)
點擊次數:499發布時間:2018/6/14

價格:¥電議
更新日期:2020/12/15 11:11:01
生 產 地:中國大陸
產品型號:GR
詳細內容
進口液化石油氣泵

名稱: 進口液化石油氣泵 壓力: 1.6MPa 型號: GR 口徑: DN25-DN100 材質: 鑄鐵、不銹鋼
英國GRIMM格林進口液化石油氣泵 UK GRIMM Imported LPG pump

英國GRIMM格林進口液化石油氣泵概述:
進口液化石油氣泵,主要用于輸送液化石油氣、二甲醚、氯甲烷 、環氧乙烷、丙烷、丙烯、丁二烯、異丁烯、甲醇等各種性質類似的揮發性液體及石油產品,特別使用于液化石油氣的裝卸車,鋼瓶灌裝,車間供料等工作場合。該泵為容積式葉片泵,其結構先進,定子曲面由復合曲線組成,兩端采用機械密封,各固定配合端面均采用“O”型密封圈,旋轉運動的配合部件均采用金屬相對應非金屬,具有使用安全可靠、一機多用的功能。
英國GRIMM格林進口液化石油氣泵工作原理:
進口液化石油氣泵型式為容積式葉片泵,工作靠葉片離心滑動,流量與軸的轉速有關,定子內曲面采用國內獨創的復合曲線制成,定子與轉子、擋板、葉片組成十個密封腔體,由于定子曲面是復合曲線,當轉子轉動時進口腔體積逐漸增大,并形成負壓產生吸力,從而將油液吸入,當轉子旋轉一定角度后,容積截面逐漸減小,從而將油液壓出,在吸油腔與壓油腔之間有一封油塊把吸油腔與壓油腔隔開。葉片靠離心力和兩擋板結構從而與定子內曲面緊密貼合,使泵在額定狀態下正常工作。
英國GRIMM格林進口液化石油氣泵技術參數:
流 量:2-80m3/h
功 率:1.5-18.5kw
轉 速:600r/min、780r/min
口 徑:25-100mm
壓 差:0.4~0.5MPa
溫度范圍:-40℃~40℃
工作壓力:1.6Mpa
材 質:鑄鐵、不銹鋼
英國GRIMM格林進口液化石油氣泵應用領域:
主要用于輸送液化石油氣、二甲醚、氯甲烷 、環氧乙烷、丙烷、丙烯、丁二烯、異丁烯、甲醇等各種性質類似的揮發性液體及石油產品,特別使用于液化石油氣的裝卸車,鋼瓶灌裝,車間供料等工作場合。
UK GRIMM Imported LPG pump summary:
Imported LPG pumps are mainly used to transport volatile liquids and petroleum products such as liquefied petroleum gas, two methyl ether, chloromethane, propylene oxide, propane, propylene, butadiene, isobutene, methanol and other volatile liquids and petroleum products, especially in liquefied petroleum gas loading and unloading trucks, steel bottle filling, and workshop feeding. The pump is a volumetric vane pump, its structure is advanced, the stator surface is composed of composite curves, mechanical seals are adopted at both ends, and the "O" sealing ring is used for each fixed end face. All the rotating components are metal relative to non metal. It has the function of safe and reliable use and multi use.
UK GRIMM Imported LPG pump working principle:
The type of imported liquefied petroleum gas pump is a volume type vane pump, which depends on the centrifugal sliding of the blade. The flow is related to the rotational speed of the shaft. The inner surface of the stator is made of the original composite curve. The stator is composed of ten sealed cavities with the rotor, the baffle and the blade, because the stator surface is the complex curve, when the rotor is rotated, the inlet body is made. The product will gradually increase and form a suction pressure to produce the suction, and then the oil is sucked into. When the rotor rotates a certain angle, the volume section gradually decreases, thus the oil hydraulic out, and there is an oil block between the oil suction cavity and the pressure chamber to separate the oil suction cavity from the pressure chamber. The blade is tightly attached to the inner surface of the stator by centrifugal force and two baffle structure, so that the pump can work normally under rated condition.
UK GRIMM Imported LPG pump technical parameter:
Flow: 2-80m3/h
Power: 1.5-18.5kw
Speed: 600r/min, 780r/min
Caliber: 25-100mm
Pressure difference: 0.4 ~ 0.5MPa
Temperature range: -40 C ~ 40 C
Work pressure: 1.6Mpa
Material: cast iron and stainless steel
UK GRIMM Imported LPG pump application area:
It is mainly used to convey volatile liquids and petroleum products such as liquefied petroleum gas, two methyl ether, chloromethane, propylene oxide, propane, propylene, butadiene, isobutene, methanol and other volatile liquids and petroleum products, especially in the loading and unloading vehicles of LPG, steel bottle filling, and workshop feeding.

進口液化石油氣泵:http://www.021fmc.cn/aspcms/product/2018-5-10/1348.html
GRIMM中國:

名稱: | 進口液化石油氣泵 | |
壓力: | 1.6MPa | |
型號: | GR | |
口徑: | DN25-DN100 | |
材質: | 鑄鐵、不銹鋼 |
英國GRIMM格林進口液化石油氣泵 UK GRIMM Imported LPG pump
英國GRIMM格林進口液化石油氣泵概述:
進口液化石油氣泵,主要用于輸送液化石油氣、二甲醚、氯甲烷 、環氧乙烷、丙烷、丙烯、丁二烯、異丁烯、甲醇等各種性質類似的揮發性液體及石油產品,特別使用于液化石油氣的裝卸車,鋼瓶灌裝,車間供料等工作場合。該泵為容積式葉片泵,其結構先進,定子曲面由復合曲線組成,兩端采用機械密封,各固定配合端面均采用“O”型密封圈,旋轉運動的配合部件均采用金屬相對應非金屬,具有使用安全可靠、一機多用的功能。
英國GRIMM格林進口液化石油氣泵工作原理:
進口液化石油氣泵型式為容積式葉片泵,工作靠葉片離心滑動,流量與軸的轉速有關,定子內曲面采用國內獨創的復合曲線制成,定子與轉子、擋板、葉片組成十個密封腔體,由于定子曲面是復合曲線,當轉子轉動時進口腔體積逐漸增大,并形成負壓產生吸力,從而將油液吸入,當轉子旋轉一定角度后,容積截面逐漸減小,從而將油液壓出,在吸油腔與壓油腔之間有一封油塊把吸油腔與壓油腔隔開。葉片靠離心力和兩擋板結構從而與定子內曲面緊密貼合,使泵在額定狀態下正常工作。
英國GRIMM格林進口液化石油氣泵技術參數:
流 量:2-80m3/h
功 率:1.5-18.5kw
轉 速:600r/min、780r/min
口 徑:25-100mm
壓 差:0.4~0.5MPa
溫度范圍:-40℃~40℃
工作壓力:1.6Mpa
材 質:鑄鐵、不銹鋼
英國GRIMM格林進口液化石油氣泵應用領域:
主要用于輸送液化石油氣、二甲醚、氯甲烷 、環氧乙烷、丙烷、丙烯、丁二烯、異丁烯、甲醇等各種性質類似的揮發性液體及石油產品,特別使用于液化石油氣的裝卸車,鋼瓶灌裝,車間供料等工作場合。
UK GRIMM Imported LPG pump summary:
Imported LPG pumps are mainly used to transport volatile liquids and petroleum products such as liquefied petroleum gas, two methyl ether, chloromethane, propylene oxide, propane, propylene, butadiene, isobutene, methanol and other volatile liquids and petroleum products, especially in liquefied petroleum gas loading and unloading trucks, steel bottle filling, and workshop feeding. The pump is a volumetric vane pump, its structure is advanced, the stator surface is composed of composite curves, mechanical seals are adopted at both ends, and the "O" sealing ring is used for each fixed end face. All the rotating components are metal relative to non metal. It has the function of safe and reliable use and multi use.
UK GRIMM Imported LPG pump working principle:
The type of imported liquefied petroleum gas pump is a volume type vane pump, which depends on the centrifugal sliding of the blade. The flow is related to the rotational speed of the shaft. The inner surface of the stator is made of the original composite curve. The stator is composed of ten sealed cavities with the rotor, the baffle and the blade, because the stator surface is the complex curve, when the rotor is rotated, the inlet body is made. The product will gradually increase and form a suction pressure to produce the suction, and then the oil is sucked into. When the rotor rotates a certain angle, the volume section gradually decreases, thus the oil hydraulic out, and there is an oil block between the oil suction cavity and the pressure chamber to separate the oil suction cavity from the pressure chamber. The blade is tightly attached to the inner surface of the stator by centrifugal force and two baffle structure, so that the pump can work normally under rated condition.
UK GRIMM Imported LPG pump technical parameter:
Flow: 2-80m3/h
Power: 1.5-18.5kw
Speed: 600r/min, 780r/min
Caliber: 25-100mm
Pressure difference: 0.4 ~ 0.5MPa
Temperature range: -40 C ~ 40 C
Work pressure: 1.6Mpa
Material: cast iron and stainless steel
UK GRIMM Imported LPG pump application area:
It is mainly used to convey volatile liquids and petroleum products such as liquefied petroleum gas, two methyl ether, chloromethane, propylene oxide, propane, propylene, butadiene, isobutene, methanol and other volatile liquids and petroleum products, especially in the loading and unloading vehicles of LPG, steel bottle filling, and workshop feeding.
進口液化石油氣泵:http://www.021fmc.cn/aspcms/product/2018-5-10/1348.html GRIMM中國:
上海秉奇閥門有限公司為GRIMM公司在中國的總代理,是中國擁有GRIMM代理權及銷售權,主要為中國地區客戶提供服務與技術支持,同時,秉奇人員也積極參與總部技術培訓學習,并不斷掌握產品原理、實際運作、工程技術做為基石,完善對中國地區客戶需求。
關于GRIMM:
英國格林(GRIMM)國際有限公司是亞太地區流體控制領域的主要生產和供應商之一,公司總部位于克萊福德,擁有一支有經驗的研發隊伍,實行全球統一設計,統一標準,在水泵領域內處于ling先地位。在許多個國家均有生產水泵基地,中國由上海秉奇閥門負責中國市場各項業務與技術支持中心,同時向中國市場銷售。
英國格林(GRIMM)產品已廣泛應用于市政給排水、建筑、石油、化工、液化氣、食品、制藥、發電、冶金、礦產、鍋爐蒸汽系統、壓力容器、原子能、航空、火箭等各領域,以及人們日常生活中。
英國格林(GRIMM)主要產品有:管道泵、離心泵、隔膜泵、磁力泵、真空泵、潛水泵、排污泵、計量泵、衛生級泵、羅茨風機等系列產品。
服務體系:
GRIMM品質:
GRIMM公司注重產品質量及使用壽命,全部采用先進制造技術和生產設備,并堅持不懈研發新產品,為確保不間斷的全過程質量控制,在生產過程中采用(SPC)過程控制和(TQM)全面質量管理;GRIMM的嚴格規范實現了不讓品質拖節,有效保障產品每個細節達到的性能指標。
GRIMM專業:
掌握核心的流體控制技術,提供市場ling先的產品、服務和解決方案,幫助用戶提高效率,帶來至關重要的基礎設施。
GRIMM服務:
我們與用戶緊密合作,支持一系列系統使用技術和文件報告,提供售前、售中、售后服務和技術支持,有了您的信任與支持,我們將更完善、更高效提供水泵流體技術方案。
GRIMM china:
Shanghai Bingqi Valve Co., Ltd. for GRIMM company general agent in China, is China with GRIMM proxy and sales rights, provide service and technical support, mainly for Chinese customers at the same time, will also actively participate in the training of technical personnel of butterfly learning headquarters, and continue to grasp the product principle, practical operation and Engineering Technology based on customer demand, improve the Chinese area.
About GRIMM:
Uk GRIMM International Co., Lid is the field of fluid control in the Asia Pacific region is one of the main production and suppliers, the company headquarters is located in Clay Forde, has an experienced R & D team, the implementation of a global unified design, unified standards, a leading position in the field of water pump. In many countries, there are production pump base, China by the Shanghai Bingqi valve, responsible for the Chinese market business and technical support center, while selling to the Chinese market.
Uk GRIMM products have been widely used in various fields for municipal drainage, construction, petroleum, chemical, gas, food, pharmaceutical, power generation, metallurgy, mining, boiler steam system, pressure vessel, atomic energy, aerospace, rockets, and people's daily life.
Uk GRIMM the main products are: pipeline pump, centrifugal pump, diaphragm pump, magnetic pump, vacuum pump, submersible pumps, sewage pumps, metering pumps, sanitary pump, blower and other products.
Service system:
GRIMM quality:
GRIMM company pays attention to product quality and service life, all adopt the advanced manufacturing technology and production equipment, and unremittingly research and development of new products, the whole process of quality control to ensure uninterrupted, used in the production process (SPC) process control (TQM) and total quality management; strictly regulate the implementation of GRIMM has not let the quality drag day, effectively guarantee the performance of each product details.
GRIMM major:
Fluid control technology master core, market leading products, services and solutions that help users improve efficiency, bring critical infrastructure.
GRIMM service:
We work closely with the user, support a series of system using technology and file reports provide pre-sale, sale, customer service and technical support services, with your trust and support, we will be more perfect and more efficient to provide technical solutions of fluid pump.
英國格林總代理商:上海秉奇閥門有限公司,咨詢:
Uk GRIMM total agents: Shanghai Bingqi Valve Co., Ltd., WeChat Advisory:
Welcome new and old customers call negotiate!
Contacts:Huang Tianxiang
:673088832
Mobile Phone: (同號)
Company Phone:
Add:Lane 51, dragon road, Shanghai, Xuhui District