公眾號 ayiwangapp17
阿儀網移動端
詳細內容
| Measurement of torque driver / torque wrench |
| 仠 TORQUE TESTER 丂DIS-IP series |
 |
| Management of various torque wrench torque drivers A new function is carried (1) Display Board Became Legible. 丂(A Measurement modea unit. Other coded data is丂displayed.) (2) Fault charge protection loading. It is pilot-lamp lighting during charge. IndicatortDetector dissociate. Easy to install to small space. Torque wrench(pre set type),Torque driver,etc. It stands to inspectionmanagement of a torque tool as a standard machine in the comoany at a role. Abundant variations. Since the model of series is abundant, the torque from low torque to high torque is managed by package.It is the optimal as a standard machine of management. A Display screen became large. It is very legible Even from the distant place, a numerical check is easy. The main features 仩 Yes-no decision丂 仩 Average calculation 仩 Data storage is 800 affairs. 仩 A convenient functional setup of a setup of a measurement start value etc. 仩 Data output at real time (every about 1/180 seconds).丂 仩 USB terminal data output 仩It is a rechargeable battery drive, the installation to the spot is also easy. 仩By the auto power OFF, It prevents forgetting to turn off the power. 仩One-touch zero adjustment 仩An auto clearance (0.1 0.5 1.0 1.5 2.0 2.5 3.0 sec) can be set up. 丂丂It is very convenient for a continuous check. 仩The operation torque of a QL typepre set type wrench driver can read measured value correctly in peak down mode (P-D). |
| Specification | DIS-IP05 | 俢IS-俬俹5 | 俢IS-俬俹50 | 俢IS-俬俹200 | 俢IS-俬俹500 | |
| Measuring range (at time of Track) | 2.0乣500 mN 0.30乣50 kgf丒cm 0.30乣45 lbf丒in | 0.030乣5 N 0.30乣50 kgf丒cm 0.30乣45 lbf丒in | 030乣50 N 3.0乣500 kgf丒cm 3.0乣450 lbf丒in | 3.0乣200 N 30乣2000 kgf丒cm 30乣1800 lbf丒in | 3.0乣500 N 30乣5000 kgf丒cm 30乣4500 lbf丒in | |
| Accuracy | 亇0.5% (499 or less digit亇3digit) | |||||
| Display | The 4 figures digital display of LCD | |||||
| The measurement direction | CW-CCW (rightleft) | |||||
| Measuring mode | P-P Peak | Peak load value hold. | ||||
| T-R Track | Indication of real time torque value. | |||||
| P-D Peak down | Holding Load Value at the moment to change from upward to downword | |||||
| C Real-time output | Load torque value is outputted every about1/ 180 second . | |||||
| Decision function | Setting of torque value | A Maximuma minimum value are in a measuring range,a setup is possible. Can confirm the set value by the buzzer sound or LED. | ||||
| The Maximum, the minimum,the average value | Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels. | |||||
| Automatic Clearance | Automatically clear the displayed value after certain time (0.5 - 3.0 sec,selectable at each 0.5 sec). Setting 0.0 sec for manual Zero clearance | |||||
| One-touch zero | Easy Zero-Adjustment with pressing CLEAR button | |||||
| Data spec. | Data transfer | ASCII fomat (Baud rate :19200) | ||||
| Data memory | 800 data | |||||
| Power supply | Ni-Cd chargeable battery 1.2V亊5cells 丂700mAh | |||||
| Auto power save | 10 minutes no use, automatically switch off. | |||||
| Charging time | about 3 hours | |||||
| Continunous working time | 12 hours | |||||
| Meter outside type dimension | 100(W) x105(D) x33 (H) (It does not contain by the projection thing.) | |||||
| Weight | Meter part 520g | |||||
| Code length | Standard 1m (there are automatic machines no less than 4m as an option.) | |||||
| Accessories (one piece each) | AC/DC adaptor | |||||
| An inspection report, a proofreading certificate, a traceability system figure | ||||||
| Detection machine size figure | Detection machine outside figure | ||||
| Form | IP05/5 | IP50 | IP200 | IP500 |  |
| 俙 | 兂40 | 兂50 | 兂60 | 兂80 | |
| 俛 | 41.2 | 63 | 73 | 99 | |
| 俠 | 5 | 10 | 10 | 15.5 | |
| 俢 | 兂60 | 兂90 | 兂110 | 兂140 | |
| 俤 | 兂50 | 兂74 | 兂90 | 兂116 | |
| 俥(Three division) | 兂4.2 | 兂6.3 | 兂8.3 | 兂10.5 | |
| 俧丂(Socket intuition affinity) | 6.35倱倯 | 9.5倱倯 | 12.7倱倯 | 19倱倯 | |
| weight | 189倗 | 632倗 | 1.8倠倗 | 3倠倗 | |
關鍵詞：數顯扭力測試儀
日本思達氣動油壓工具測量儀器
見詳細說明 更多詳細思達氣動油壓工具測量儀器
見詳細說明 更多詳細思達氣動油壓工具測量儀器
見詳細說明 更多詳細
浙公網安備 33010502000804號
互聯網藥品信息服務資格證書:(浙)-非經營性2019-0043 增值電信業務經營許可證：浙B2-20190746
