公眾號 ayiwangapp17
阿儀網移動端
詳細內容
| Management of electric screw driver |
| 仠Torque Meter 丂CD-100M/10M |
 |
| upgrade丂The main changed parts (1) In a display board, "measurement mode", a "measurement unit", "the maximum, the minimum, an average, etc.", etc. display. (2) Change of Measurement Unit Can be Performed N-m <=> kgf-cm <=>lbf-in Etc. (3) Setup of Various Numerical Values Can be EasyCan Carry Out Speedily. (4) Calculation of Maximum, Minimum,Average Became Intelligible. (5) The call of the saved data became easy. The output of data also became intelligible. (6) Fault charge protection. It is pilot-lamp lighting during charge. (7) Data Output is USB Form (B Type). (8) Memory Data are 800 Affairs (9) Real-time Output is Every 1 / 180 Seconds. |
| Specification | CD亅100M | CD亅10M | ||
| Measuring range (at the time of Track) | 0.10乣10丂N丒m | 1.0乣100丂們N丒m丂 | ||
| 1.0乣100 kgf丒cm | 0.10乣10 kgf丒cm | |||
| 1.0乣90 lbf丒in | 0.10乣9 lbf丒in | |||
| Accuracy | 亇0.5亾乮F/S乯(199 or less digit亇1digit) | |||
| Display | The 3.5 figures digital display of LCD | |||
| The measurement direction | CW-CCW (rightleft) | |||
| Measurement Mode | Track , P-P(peak to peak) , P-D(Peak-Down) , C(Real-time Output) | |||
| Highlow limits judging function | Highlow value are measurement within the limits,can be set up. | |||
| Real-time Output | Load torque value is outputted every about1/ 180 second. | |||
| The Maximum, the minimum,the average value display | The maximum, the minimum, average value,the data number of 30 data are displayed.It saves to ten channels. | |||
| Automatic Clearance | Automatically clear the displayed value after certain time (0.5 - 3.0 sec,selectable at each 0.5 sec). Setting 0.0 sec for manual Zero clearance | |||
| One-touch zero | A clear button is pushedit is a zero.丂 Data is outputed. | |||
| Data output | ASCII format (baud rate 19200) | |||
| Power supply | Ni-Cd chargeable battery 1.2V亊5cells 700mAh | |||
| Auto power save | 10 minutes no use, automatically switch off. | |||
| Charging time | About 3 hours | |||
| Continunous working time | About 12 hours | |||
| Socket fit mouth | 仩 20mm/ 仩9.5mm | |||
| Weight | Abbreviation 1 kg | |||
| Outside dimension | 160乮W乯亊125乮D乯亊55乮H乯 | |||
| Attachment | Measurement joint丂SJ50/SJ10K | Measurement joint丂SJ10 | ||
| Accessories (one piece each) | AC/DC adaptor | |||
| Exclusive receipt case | ||||
| An inspection report, a proofreading certificate, traceability system figure | ||||
| SJ50 | SJ10 | About an adapter 亙measurement joint丂SJ乮PAT.P乯亜 |
 |  | It does not decompose, even if it rewinds joint too much Since the adapter attached is the coil spring compression system of the conventional system, you can use it by the conventional management method. Moreover, this adapter is special structure. It does not decompose, even if it rewinds joint too much. You can use it in comfort. |
關鍵詞：電批扭力測試儀
日本思達氣動油壓工具測量儀器
見詳細說明 更多詳細思達氣動油壓工具測量儀器
見詳細說明 更多詳細思達氣動油壓工具測量儀器
見詳細說明 更多詳細
浙公網安備 33010502000804號
互聯網藥品信息服務資格證書:(浙)-非經營性2019-0043 增值電信業務經營許可證：浙B2-20190746
