国产乱xxⅹxx国语对白,黄片一级毛片,JAPANESEHD无码国产在线看

產品簡介

見詳細說明

詳細內容

公司簡介

Measurement of torque driver / torque wrench

仠 TORQUE TESTER 丂DIS-IP series

Management of various torque wrench torque drivers
A new function is carried
(1) Display Board Became Legible.
丂(A Measurement modea unit. Other coded data is丂displayed.)
(2) Fault charge protection loading. It is pilot-lamp lighting during charge.

IndicatortDetector dissociate.
Easy to install to small space. Torque wrench(pre set type),Torque driver,etc.
It stands to inspectionmanagement of a torque tool as a standard machine in the comoany at a role.

Abundant variations.
Since the model of series is abundant, the torque from low torque to high torque is managed by package.It is the optimal as a standard machine of management.

A Display screen became large. It is very legible
Even from the distant place, a numerical check is easy.

The main features
仩 Yes-no decision丂
仩 Average calculation
仩 Data storage is 800 affairs.
仩 A convenient functional setup of a setup of a measurement start value etc.
仩 Data output at real time (every about 1/180 seconds).丂
仩 USB terminal data output

仩It is a rechargeable battery drive, the installation to the spot is also easy.
仩By the auto power OFF, It prevents forgetting to turn off the power.
仩One-touch zero adjustment
仩An auto clearance (0.1 0.5 1.0 1.5 2.0 2.5 3.0 sec) can be set up.
丂丂It is very convenient for a continuous check.
仩The operation torque of a QL typepre set type wrench driver can read measured value correctly in peak down mode (P-D).

Specification		DIS-IP05	俢IS-俬俹5	俢IS-俬俹50	俢IS-俬俹200	俢IS-俬俹500
Measuring range (at time of Track)		2.0乣500 mN 0.30乣50 kgf丒cm 0.30乣45 lbf丒in	0.030乣5 N 0.30乣50 kgf丒cm 0.30乣45 lbf丒in	030乣50 N 3.0乣500 kgf丒cm 3.0乣450 lbf丒in	3.0乣200 N 30乣2000 kgf丒cm 30乣1800 lbf丒in	3.0乣500 N 30乣5000 kgf丒cm 30乣4500 lbf丒in
Accuracy		亇0.5% (499 or less digit亇3digit)
Display		The 4 figures digital display of LCD
The measurement direction		CW-CCW (rightleft)
Measuring mode	P-P Peak	Peak load value hold.
	T-R Track	Indication of real time torque value.
	P-D Peak down	Holding Load Value at the moment to change from upward to downword
	C Real-time output	Load torque value is outputted every about1/ 180 second .
Decision function	Setting of torque value	A Maximuma minimum value are in a measuring range,a setup is possible. Can confirm the set value by the buzzer sound or LED.
The Maximum, the minimum,the average value		Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
Automatic Clearance		Automatically clear the displayed value after certain time (0.5 - 3.0 sec,selectable at each 0.5 sec). Setting 0.0 sec for manual Zero clearance
One-touch zero		Easy Zero-Adjustment with pressing CLEAR button
Data spec.	Data transfer	ASCII fomat (Baud rate :19200)
	Data memory	800 data
Power supply		Ni-Cd chargeable battery 1.2V亊5cells 丂700mAh
Auto power save		10 minutes no use, automatically switch off.
Charging time		about 3 hours
Continunous working time		12 hours
Meter outside type dimension		100(W) x105(D) x33 (H) (It does not contain by the projection thing.)
Weight		Meter part 520g
Code length		Standard 1m (there are automatic machines no less than 4m as an option.)
Accessories (one piece each)		AC/DC adaptor
		An inspection report, a proofreading certificate, a traceability system figure

Detection machine size figure					Detection machine outside figure
Form	IP05/5	IP50	IP200	IP500
俙	兂40	兂50	兂60	兂80
俛	41.2	63	73	99
俠	5	10	10	15.5
俢	兂60	兂90	兂110	兂140
俤	兂50	兂74	兂90	兂116
俥(Three division)	兂4.2	兂6.3	兂8.3	兂10.5
俧丂(Socket intuition affinity)	6.35倱倯	9.5倱倯	12.7倱倯	19倱倯
weight	189倗	632倗	1.8倠倗	3倠倗

關鍵詞：數顯扭力測試儀

上海偉創精密儀器有限公司是集日本,美國,瑞士,德國品牌儀器,儀表,量具,工具,設備為一體的大型批發商。主要經營品牌如下:
1、日本TOHNICHI （東日）扭力起子、起力扳手、扭矩表、瓶蓋扭力測試儀 2、日本CEDAR思達數顯扭力扳手、扭力起子、電動工具扭力檢測儀、氣動工具扭力檢測儀 3、日本KANON （中村）扭力起子、扭力扳手、扭力測試儀
4、日本AIKOH （愛光）指針、數顯式推拉力計、按鍵測試儀、彈簧拉壓力測試臺 5、日本SHIMPO （電產）推拉力計、測試臺、張力計、頻閃儀,轉速表
6、日本IMADA （依夢達）指針式推拉力計、數顯推拉力計、測試臺
7、日本PEAK （東海）放大鏡，刻度放大鏡,帶燈放大鏡,筆式放大鏡,百倍鏡,頭盔鏡,圓筒放大鏡 8、日本MITUTOYO （三豐）測量工具，數顯卡尺.千分尺.高度計.百分表.千分表.表面粗糙度計
9、日本EIESN艾森精密針規、　　日本SK新瀉精密針規　　美國MEYER英制針規　　日本ISSOKU/JPG精密塞規，環規
10 、日本PEACOCK （孔雀）百分表,千分表,杠桿百分表,杠桿千分表,測厚表,深度計,量規,卡規 11、日本TELOCK （得樂）橡膠硬度計、測厚規、深度表
12、日本FUJITOOL （富士）半徑規、角度尺
13、瑞士SYLVAC 數顯百分表、千分表
14、日本FSK 精密水平尺；方型水平儀,長型水平儀,可調式水平儀，偏心檢測器
15、日本KANETEC （強力牌） V 型磁性座、磁性表座、高斯計
16、日本TOKYO SEIKI （精機株式會社）橫向張力計及紡織專用張力計
17、日本YOKOGAWA（橫河）線速計、UR1800工業記錄儀,DR230記錄儀
18、日本SATO （佐騰）溫濕度記錄儀，紅外線測溫儀.電子表面溫度計
19、日本ANRITSU 表面溫度計
20、日本KNAETEC （強力牌）高斯計、脫磁器
21、臺灣TES 噪音計
22、日本URYU（瓜生）氣動工具系列
23、日本YOKOGAWA橫河銅線,漆包線專用張力計
24、日本KETT凱特膜厚計涂層測厚儀
25、英國ENGIS研磨膏
26、瑞士TETKO網板張力計中國一級代理商
27、日本ISUZU東京溫濕度記錄儀
28、瑞士CORREX確力士張力計
29、日本OTSUKA大冢臺式放大鏡
30、日本SUCCESS成功牌指針式推拉力計
31、日本Digitech迪吉特?cái)?shù)顯推拉力計，推拉力測試臺
32、美國Hyprez喜百事研磨膏，潤滑油
33、日本JEIC/ACO震動計
34、瑞士TESA 測量工具，數顯卡尺.千分尺.高度計.百分表.千分表.表面粗糙度計,影像測量儀,三坐標等中國一級代理商

公司同類產品

日本思達氣動油壓工具測量儀器
見詳細說明 更多詳細
思達氣動油壓工具測量儀器
見詳細說明 更多詳細
思達氣動油壓工具測量儀器
見詳細說明 更多詳細
日本思達扭力工具
見詳細說明 更多詳細

您最近閱讀過的產品

elisa試劑盒

久久久精品午夜_国产一二三四ts人妖_久久久久成人精品免费播放_日本女人一级片_亚洲射逼_日韩有码第一页

頻道

產　品

所有產品分類

產品屬性本產品采購屬于商業貿易行為

日本思達扭力測試儀

企業檔案

產品簡介

詳細內容

詳細內容

公司簡介

公司同類產品

相關標簽

您最近閱讀過的產品

在線咨詢

久久久精品午夜_国产一二三四ts人妖_久久久久成人精品免费播放_日本女人一级片_亚洲射逼_日韩有码第一页

頻道

產 品

所有產品分類

產品屬性本產品采購屬于商業貿易行為

日本思達扭力測試儀

企業檔案

產品簡介

詳細內容

詳細內容

公司簡介

公司同類產品

相關標簽

您最近閱讀過的產品

在線咨詢

產　品